80 Comments
Aurora
9/8/2021 12:19:39 pm
The Engineering process starts bye A sketch out your idea.Next step is do you think your going to have to try it again. Next do you need some Tools to make it .next time to build. If you get wrong try again and again and again never give up. Next From your mistakes and you learn that it’s wrong or right
Reply
Diego
9/8/2021 01:00:37 pm
The first step of the engineering process is to build a model and explain how it will work. The next step is plan and how you're going to build it. Then you will need the tools that you need. You will begin to build and if you fail you'll try again. Engineers never give up.
Reply
Elizabeth
9/8/2021 01:07:47 pm
First off they sketch there idea out. second they might think that they did it wrong so they basiclly wanna do it again but they might not think that. third they wanna need tools to do in the oftens they never had tools they used bones to use tools to use tools a bone is hard and can sometimes break. last i think is that thwy test it out if its right or wrong they might thnk thy gatta do it again but not really! BIAA
Reply
Chloe
9/8/2021 01:09:18 pm
Engineering requires thinking of the problem. When thinking of a problem they think of how there going to fix it. They research what there working on or trying to fix. They research what they know about so they can think of ways of problem solving. When they have done there research they think of a solution which is idea for there project. The solution is what they planned to make. When they have a solution they make small versions of what they’ve made. Then they test them to make sure there working and are good to use when there used in full form.Then engineers probably would think about there project and think if it was working the way they wanted it to or ways to possibly to make it better.
Reply
Drake
9/8/2021 01:10:55 pm
Engineers make things. Everything you can see has been made by an engineer engineers what a thing then it would be very hard to make things without them. Engineers are very important they need to practice. Kind of like the car that wooden.
Reply
Aubrey
9/8/2021 01:13:39 pm
The first thing to do if you want to be an engineer is to sketch the thing out because if you don’t sketch anything out you could probably fail. But failing is a good thing because if you fail you can learn things that will and will not work but if you give up that would be bad. And if you do want to be an engineer you keep trying because you should never give up. ßÿė.
Reply
Barrett
9/8/2021 01:15:57 pm
First you need to sketch a picture of what it will look like then you test it don't worry you won't always get it the first try finally your have your finished product
Reply
Hatch
9/8/2021 01:28:37 pm
First engineers define the problem then they do research next develop a solution then they build prototype next they test it and usually Build a new prototype then you evaluate your solution.
Reply
Bryce
9/8/2021 01:28:38 pm
The engineering proces is find the problem,do research, develop a solution, design your solution, build prototypes, test it, make your solution.You use this to make sure you get it the way you want it.It also helps you create your invention.One more reason you need to use the engineering process is that helps figure out it why your invention isn’t working.
Reply
Bryce
9/8/2021 01:29:14 pm
The engineering proces is find the problem,do research, develop a solution, design your solution, build prototypes, test it, make your solution.You use this to make sure you get it the way you want it.It also helps you create your invention.One more reason you need to use the engineering process is that
Reply
Drake
9/8/2021 01:29:51 pm
Engineers build things. If engineers were not a thing then we wouldn’t build anything there’s many engineers everything you see is made from an engineer. Like the wooden car. This paragraph shows me that engineers do many things.
Reply
Luke Kenney
9/8/2021 01:37:17 pm
First, you have to identify your problem. The next step is to make a solution. After that you have to draw out your plan. Next you will have to build a prototype in Test your solution. Next do you have to observe your experiment . And then keep changing The invention until it works.
Reply
Bryant Ramseur
9/8/2021 01:41:38 pm
The first thing you have to do it to take a picture and sketch what you want it to look like but if you don’t do it you won’t know what to build. Sometimes if you mess up you can learn more how to do it. You can be an engineer to know how to sketch build and be smart.byyyyye
Reply
Saskia
9/8/2021 01:41:43 pm
The engineering progress is first, draw a sketch of what you want it to look like and be and explain it. Then, you have to get tools to build it, make sure to have the correct ones! And also make sure to try to improve your creation. And then you start building, don’t give up and try your best. When you build it, try to sell it to make money. That is the engineering progress. Have a good day!
Reply
Liam
9/8/2021 01:48:08 pm
Engineers use the engineering process for all of their tests. first you have to find your problem. Next you have to research good ways to do it. Then you have to make a possible solution. Next you have to have to make a final solution. Then you have to make a prototype. Next you have to test if it works witch will probably take a few tries. Finally you have to evaluate your soulutions. And that is the engineering process.
Reply
Krista
9/8/2021 02:06:02 pm
The first step is think of what and why your gonna make or the reson why. Next is have to do your research and think. Then you have to make a silicon to the problem and the silicon is most likely your invention. The next step is sketch out what it look like. Then you build the invention but maybe smaller so you can test it out. Now is testing it to see if it's how you wanted it. Last ask your self some questions about it like what was wrong is it how I want or how can I change it. And you will also probably have to repeat the steps over and over again till its right. And that the engineering prosses.
Reply
Catiana
9/8/2021 02:07:31 pm
First engineeners come up with an idea. Then they sketch there idea. Then engineeres build there idea then they test it. Then they see if it works then build the real thing.
Reply
Nathan Coates
9/8/2021 02:12:38 pm
The engineering process is planning to solve a problem by doing research. After our research we design things to test and test them. We see if it worked or if it did not. If it did not work we can change the design and test it again.
Reply
Will
9/8/2021 02:16:16 pm
The engineering process are steps engineers use kinda like the scientific method and scientists it helps them design new things like buildings. The first step is to find your problem like with Alexzander grand bell which for him was that long distance communication was hard and long. The next step is research ways to solve solve the problem. The next step after that is to make a prototype of what you want to make it can be as bigger as the thing your making or smaller. Last you have a to test it but if it doesn’t work you then have to find the problem then fix it. It might take a few tries but eventually you get it correct and that’s the engineering process.
Reply
Everett S.
9/8/2021 02:32:18 pm
The engineering process is the steps a engineer would normally take. the first step is to figure the problem out, what's the problem you want to fix? The second step is to do the research necessary, find out if it already exists. the next step is to determine the solution. how are you going to fix it? The nextstep in the process Is to design the solution, what will it look like? Another step is to make a prototype. The next one is to test the prototype. see if it will fail. Lastly, evaluate your solutions.
Reply
Emilee Coates
9/8/2021 02:36:08 pm
The Engineering Process can be used if you didn't like the way a shirt fit on you. You could sew other things on it to make it more fashionable and add more comfortable thread. If that idea did not work because the material was itchy, you could use a different type of material like wool or cotton. If that idea works you could go to a fashion company and try to sell the shirt to earn money. By doing those things one day you can even become a designer!
Reply
Ava mendez
9/8/2021 02:38:53 pm
The first step if you want to be a engineer you will have to draw a sketch out the detail and then you have to develop a solution then what you want to do is make your design your solution build your prototypes then you test it but do not worry it will probably take a few tries before you get the hang of it.
Reply
Jabeer
9/8/2021 02:43:55 pm
The engineering process are a series of steps that engineers use to help them solve problems. The first step is to find the problem because how else would you have a problem to solve. Next you start your research to find the answer. Step 3 is to develop a possible solution to see if it will work and if it doesn't try another solution until you get it right. Step 4 is to design your solution so you know what it will look like. Step 5 is to build a prototype which is just a simple version of what you are going to make. Step 6 is to test it testing it makes the engineers know that they want it to work like. Step 6 is to evaluate solutions which is when engineers question everything and try to find solutions for the problems.
Reply
Samantha
9/8/2021 02:51:36 pm
Have you ever looked at an object and thought who made that well if you do I have the answer for to that. Engineers engineers are people make all sorts of stuff buildings,TVs,lamps,signs and mirrors to solve problems in the world.Before engineers solve a problem they have to figure what the problem is first after the figure what the problem is they do their research they do research to find if their are better ones or ones that don’t work that well.Next we have to develop a solution that means we have to figure out how it will work and also have to design your solution.After your done with that we have to build a prototype a prototype is just a version of your invention just that you can hold it whether it’s big or small you just need this to test it to see if it works the way they wanted to.Now we have to evaluate your solutions which means asking things of whether they are working or not or why followed by more questions.And most of the times these questions will send you back then you have to design a new solution then build a prototype then test it again it may take days,weeks or even years to figure it out!
Reply
Taylor
9/8/2021 02:54:38 pm
There are about 7 ways to become an engineer. First you have to define your problem that means find out what your problem is. Next you will have to do research on what you are working on. Then you will develop a solution which means come up with a solution. After that you will want to come up with a solution or design a solution. You will also want to build a prototype and then test it. Finally you can evaluate your solutions which can also mean question everything. And then some times you will have to go back and do it a different way or pattern.
Reply
Greta
9/8/2021 03:52:12 pm
There is an Engineering process you have to go through before finishing. The first step is Identify the Problem. The second step is doYour Research. Develop a solution is how you can solve a problem.Step 4 is design. This means you can draw your design.Step 5 is building a prototype. Last step is to evaluate your solutions.
Reply
Billie
9/8/2021 04:06:11 pm
The engineering process is a series of steps taken when facing challenges. Engineers are people who build and make things. Types of engineers are: civil, mechanical, and electrical. The process: define the problem, do your research, develop a possible solution, build a prototype, test it, and evaluate your solutions. You have to figure out the problem before you can solve it.
Reply
Max
9/8/2021 04:16:55 pm
There are many types of steps in the engineering process to follow. The first step is to define the problem and the second step is to do your research on the topic one what you are doing. The third step is to try and develop a solution that might possibly be the answer the problem and the fourth step is to try to design a solution. The last three steps are to design your prototype that can be life size or very small and to test it and the last step is to evaluate your solutions. There are 3 types engineers and they are civil, electrical and mechanical.
Reply
Camila
9/8/2021 04:32:28 pm
Step is engineers plan out what they’re gonna do to make a car or something that they want to build. Once they make up the building they usually talk to other people to see if this plan is good to make a card or something else that they want to make. Then once they say yes or no or they share them or designs or something else then you can make it carefully . Then when that’s all done you have your engineering experiment that you planned out. This is what I think about engineers what they do .
Reply
Vrajs
9/8/2021 04:48:39 pm
The engineering process started first by defining the problem. Next, you do the research for the problem. After that, create a possible solution for the problem. Then, you design your solution that you made. Then after that, build a prototype after you design the solution. Last, you test the solution. And finally, analysis the solution that you made. One example is that Alfred Nobel created dynamite so miners can mine easier and do it safely. Another example is that when designing your solution you draw a sketch for example a bridge. And the last example is that Gustave Eiffel create the idea of making the Eiffel Tower in France and Gustave showed up on day 1 making the tower and knew what it would exactly how it would look.
Reply
Henry Vaughn
9/8/2021 04:50:06 pm
First you need to sketch a photo or picture of the thing you wanna make. Next you see if you wanna make another sketch or keep the one you have. Next you find what you need so you can make it. Next you start to make it or design it.
Reply
Cole Yost
9/8/2021 05:18:06 pm
The process of engineering is first, define the problem next, do your research, next you develop a solution next, design a solution next, build a prototype next, test it, finally, evaluate your solutions.
Reply
Henry Vaughn
9/8/2021 05:47:23 pm
Good job see you tommoro mr
Reply
Kennedy
9/8/2021 05:22:02 pm
Engineering is a great thing that is used a lot but if they have the idea they must use these steps . First you must define the problem then do your reasherch . After that you have to develop a possible solution design your sulution then build a prototype. Next test it last you must evalute your sulutions . If you have ever looked at stuff and wonderd how is this made well those are the steps they used to make it like inventing ac and maybe one day you can make somthing like it 😊
Reply
Scarlett
9/8/2021 05:22:11 pm
Mrs. Jacques I could not get the video to work on my iPad. Can you help me tomorrow?
Reply
Makayla
9/9/2021 03:38:26 am
It wouldn't work on mine either.
Reply
Antonio
9/8/2021 05:33:29 pm
The engineering process is used to help engineers make inventions. These are the steps to follow define the problem, do your research, develop a possible solution, design your solution, build a prototype, test it, and evaluate your solutions. Just like Alexander Graham Bell and the telephone and all the other inventors who created things like air conditioning and dynamite. That is all the steps to the engineering process.
Reply
Ryleigh
9/8/2021 05:38:58 pm
The engineering process is steps you can use to figure out a problem. The first step is writing out what they are going to do and what it will look like. The next step is putting the pieces together. The last step is trying it out. One example is creating a cell phone, another example is creating a air conditioner.
Reply
Makayla
9/9/2021 03:35:54 am
The engineering design process is when say Cole had a great new idea for a desk. He would first have to design the idea.So the engineering design process is when you are designing a idea. P.S I was not able to watch the video on my Samsung tablet because YouTube is not set up on it.
Reply
Makayla
9/9/2021 04:04:18 am
I figured out how to get the video.
Reply
Ethan
9/9/2021 03:39:26 am
First, you define the Problem or you figure it out.Next you do your research for a list of questions and how you want to answer them.Then you develop a possible solution as in to say what you invention will look like.After that, you design your solution or you sketch out what your design will look like.Next you build a prototype like what your design will be like. Then you test the prototype to see if it works the way you want it to.Last you evaluate your solution you ask if your design works how you want it to.
Reply
Makayla
9/9/2021 03:45:29 am
Hi Ethan. ☺
Reply
Anhyli’s blog
9/9/2021 03:49:33 am
There are steps to Engineering first find your problem and then Do research for your list of questions and awnser it then you can develop saloution
Reply
Makayla
9/9/2021 04:02:26 am
The engineering design process is when you first evaluate your idea then you build a model then you evaluate your solution then you test it.
Reply
Savana
9/9/2021 04:18:41 am
So the Engineering Process you say. First you need to get an idea of what you might create. You can take something and improve it or you can make something totally different! Once you get an idea you need to draw blueprints or a drawing to like understand it, the blueprints need to have all of the details. Once you're done with the blueprints, make a model this model will be almost exactly like whatever you're going to make. So what's your model is done you need to test it. What you tested in the most of the flaws mostly all of the flaws are gone you can create it!! After you create it well bam!! You have whatever you were going to make! And that is the Engineering Process for you!! Goodbye to all and all a goodbye!!
Reply
Logan
9/9/2021 04:20:00 am
The engineering process is a series of steps that are used for engineering purposes. The first step is to define the problem so you can solve it. The second step is to research that you can start with having a list of questions and the information you need to answer them. Then you develop a solution so after your research is done you can say exactly how you think you can solve the problem and when you thought of a good solution you need to figure out how it’ll actually work.
Reply
Cole Yost 0.2
9/9/2021 05:15:44 am
The process of engineering is first, define the problem next, do your research, next you develop a solution next, design a solution next, build a prototype next, test it, finally, evaluate your solutions. An example is making the air conditioning used all these steps
Reply
Makayla 0.2
9/9/2021 05:16:23 am
The engineering design process is when you first evaluate your idea then you build a model then you evaluate your solution then you test it.Like Eiffel when he was makeing the Eiffel Tower And the person that invented the telephone whose name I do not remember and the inventor of the dynamite and air conditioning.That is the engineering design process.
Reply
Everett
9/9/2021 05:24:24 am
The engineering process is the steps a engineer would normally take. the first step is to figure the problem out, what's the problem you want to fix? The second step is to do the research necessary, find out if it already exists. the next step is to determine the solution. how are you going to fix it? The nextstep in the process Is to design the solution, what will it look like? Another step is to make a prototype. The next one is to test the prototype. see if it will fail. Lastly, evaluate your solutions. Some examples are dynamite, the person who made it used the steps in the engineering process. Or the telephone, they had to test a lot before it could work. That is my answer.
Reply
Aurora
9/9/2021 05:24:35 am
The Engineering process starts bye A sketch out your idea.Next step is do you think your going to have to try it again. Next do you need some Tools to make it .next time to build. If you get wrong try again and again and again never give up. Next From your mistakes and you learn that it’s wrong or right
Reply
Scarlett
9/9/2021 05:33:08 am
The engineering process is a series of steps that engineers need to follow. First they need to get an idea of what they might make. Next put details into your drawing. They might make a bookshelf right a car. Then they make a model of the bookshelf. After they make the model they will test the bookshelf. That’s what Engineering process is.
Reply
Henry
9/9/2021 05:38:07 am
First you need to sketch a photo or picture of the thing you wanna make. Next you see if you wanna make another sketch or keep the one you have. Next you find what you need so you can make it. Next you start to make it or design it. Somethings that the video mentioned were to build a prototype and test the prototype
Reply
Brantley
9/9/2021 06:41:50 am
First you need to sketch your invention and then you test the prototype and see if it works. Then you see what materials you need to build it and then you start the process of building just like Eiffel and the Eiffel Tower.The same is with Alexander bell and the telephone and Willis Carrier and the microwave. That’s all from me byeeeee.
Reply
Ethan
9/9/2021 09:57:18 am
First, you define the Problem or you figure it out.Next you do your research for a list of questions and how you want to answer them.Then you develop a possible solution as in to say what you invention will look like.After that, you design your solution or you sketch out what your design will look like.Next you build a prototype like what your design will be like. Then you test the prototype to see if it works the way you want it to.Last you evaluate your solution you ask if your design works how you want it to.Something an engineer invented was the Eiffel Tower.
Reply
Logan
9/9/2021 09:58:32 am
The engineering process is a series of steps that are used for engineering purposes. The first step is to define the problem so you can solve it, like Alexander Graham Bell who had realized that communication was expensive so he invented the telephone. The second step is to research that you can start with having a list of questions and the information you need to answer, like the inventor of dynamite who researched about different explosives. Then you develop a solution so after your research is done you can say exactly how you think you can solve the problem and when you thought of a good solution you need to figure out how it’ll actually work.
Reply
Nathan Coates
9/9/2021 10:02:57 am
The engineering process is planning to solve a problem by doing research. After our research we design things to test and test and test them. We see if it worked or if it did not. If it did not work we can change the design and test it again just like the people who made the airconditioning mirror and telescope and think how long that took to try again.
Reply
Bryce
9/9/2021 10:05:52 am
The engineering proces is find the problem,do research, develop a solution, design your solution, build prototypes, test it, make your solution.You use this to make sure you get it the way you want it.It also helps you create your invention like whenthey created the telaphone or the air conditioner.One more reason you need to use the engineering process is that helps figure out it why your invention isn’t working.
Reply
Stanton
9/12/2021 01:45:16 pm
There are 7 steps to the engineering process. Step1. Define the problem. Step2. Do your research. Step3. Develop a possible solution. Step4. Design your solution. Step5. Build a prototype. Step6. Test it. Step7. Evaluate your solutions. And that’s the engineering process.
Reply
Zephen
9/14/2021 10:51:14 am
The engineering prosees first you have to You have to make blueprints next resrech after test it and when it is good develope it then design the length and width model is. Statue of Liberty
Reply
Halani
9/14/2021 03:57:49 pm
There are 7 steps in the engineering process. First you have to define the problem in the video it said " Bell created the telephone because it took a lot of time for people to communicate with each other. The next step is to do your research, in the video they said for this step Alfred Nobel help us blow stuff up but had to research a lot so he could have this invention successful. Another step is to develop a possible solution so some people like miners could do their job. Another step is to design your solution in the video they said " Gustave Eiffel had made the Eiffel tower he came to work one day knowing exactly what it would have to look like.
Reply
9/5/2022 06:37:20 am
Really informative article, I had the opportunity to learn a lot, thank you. https://freecodezilla.net/avada-theme-free-download/
Reply
9/11/2022 01:53:50 pm
Really informative article, I had the opportunity to learn a lot, thank you. https://kurma.website/
Reply
9/30/2022 10:50:13 am
It's great to have this type of content. Good luck with your spirit. Thank you. https://bit.ly/site-kurma
Reply
10/4/2022 03:09:45 pm
I think this post is useful for people. It has been very useful for me. Looking forward to the next one, thank you. https://escortnova.com/escort-ilanlari/istanbul-escort/arnavutkoy-escort/
Reply
10/5/2022 05:58:03 pm
I follow your posts closely. I can find it thanks to your reliable share. Thank you. https://escortnova.com/escort-ilanlari/kastamonu-escort/daday-escort/
Reply
10/6/2022 09:39:03 am
I support your continuation of your posts. I will be happy as new posts come. Thank you. https://escortnova.com/escort-ilanlari/sivas-escort/gurun-escort/
Reply
10/7/2022 12:07:24 am
I think the content is at a successful level. It adds enough information. Thank you. https://escortnova.com/escort-ilanlari/ankara-escort/sereflikochisar-escort/
Reply
10/8/2022 12:15:41 am
Thank you for your sharing. I must say that I am successful in your content. https://escortnova.com/escort-ilanlari/eskisehir-escort/tepebasi-escort/
Reply
10/8/2022 12:19:32 pm
Thoughtful and real content is shared. Thank you for these shares. https://escortnova.com/escort-ilanlari/kars-escort/kagizman-escort/
Reply
11/22/2022 08:10:58 pm
Sitemizi ziyaret et ve evden is imkanina bak: https://sites.google.com/view/evden-ek-is/
Reply
12/10/2022 05:34:46 pm
Uygun fiyatlardan takipçi satın al: https://takipcialdim.com/
Reply
12/10/2022 07:55:13 pm
Garantili Tiktok takipçi satın al: https://takipcialdim.com/tiktok-takipci-satin-al/
Reply
12/10/2022 07:55:45 pm
İnstagram beğeni satışı yapan firmamıza göz atın: https://takipcialdim.com/instagram-begeni-satin-al/
Reply
12/16/2022 01:07:57 pm
takipçi satın al ve sitemizi ziyaret et: https://takipcim.com.tr/
Reply
Leave a Reply. |
Archives
May 2023
Categories |